Almost every part of a Vivid Audio loudspeaker is unique and not to be found in any other speaker. No element is taken for granted; innovation and new methods of analysis are used to extract the highest levels of performance from every component. This is also true for every driver in Vivid Audio loudspeakers. Drivers are manufactured in-house by Vivid Audio to produce the highest measure of pristine audio reproduction.
 |
D26 Tweeter with Tapered Tube loadingOur goal in designing the D26 was to create a driver with high efficiency and first break-up frequencies, while using well established diaphragm materials with a proven track record for stability and reliability. |
 |
D50 Tweeter with Tapered Tube LoadingWhere the D26 sets a standard for high frequency reproduction, the D50 carries this philosophy down into the crucial mid band covering frequencies between 880Hz and 4kHz. |
 |
C125S Lower Midrange Driver with Tapered Tube loadingDesigned specially as the low mid-range unit for Giya, C125S has the same diaphragm assembly as C125 but features a magnet system which takes advantage of the smaller excursion requirements of a driver which only has to work above 220Hz. |
 |
C125 Low Mid DriverIn keeping with the dome drivers in the rest of the Vivid range, the C125 has an anodised aluminium cone designed with the help of computer modal analysis to give the highest break-up frequency ensuring pistonic behaviour throughout the reproduced bandwidth. |
 |
C225 Low Frequency Driver with Short-coil long-gap motor designC225 stands unique amongst bass drivers, designed as the bottom end power-house of our flagship loudspeaker; the GIYA G1. C225 shares many family resemblances with the C125 including the highly aligned radial struts used in the chassis construction. |
 |
C135 Low Frequency Driver with Short-coil long-gap motor designRetaining the motor structure and suspension profiles of the larger siblings, the C135 is well capable of producing substantial bass energy despite its reduced diameter. |
